Electronic tensile testing machine speed and force value verification method
Our after-sales engineers found in the long-term work practice that many customers used the electronic tensile testing machine for a period of time and thought that the test speed or force value of the electronic tensile testing machine was not accurate; but did not know how to test, the test results Truth is doubtful. Below we introduce to you a simple test method of Zui simple, Zui. 1. Strength test of electronic tensile testing machine After the electronic tensile testing machine enters the computer program, open the calibration interface, press the test to start, take a standard weight weight and hang it on the upper clamp connector, record the computer display power value, and calculate the difference from the standard weight weight. The error should not be Exceeded ±0.5%. 2. Speed ​​test of electronic tensile testing machine a. First record the initial position of the crossarm of the machine, and select the speed value on the control panel (measure the crossbar stroke using a standard straight steel ruler). b. At the same time as starting the machine, the electronic stopwatch starts to count for one z minutes. When the stopwatch arrives at the time, press the machine stop button, according to the time of the stopwatch. Record the cross-travel stroke value as the rate per minute (mm/min), observe the difference between the cross-travel stroke value and the straight steel ruler, and calculate the cross-travel stroke error value. Should not exceed ±1%. If the speed or strength of the electronic tensile testing machine does have problems, it can usually be handled by software. Or, we will actively cooperate with you to deal with the problem in a short time. Adult diapers are disposable urinary incontinence products, one of the adult care products, and a disposable diaper mainly suitable for incontinent adults. Bariatric Diapers,Adult Diapers Target,Medical Diapers For Adults,Medical Diapers For Adults Shandong Kangshun Daily Products Co., Ltd , https://www.centurybenifit.com
Most products are flaky and shorts type. Use adhesive sheets to connect into a pair of shorts. The adhesive sheet also has the function of adjusting the waist size so as to fit different fat and thin body shapes.
Generally, the structure of diapers is divided into three layers from the inside to the outside. The inner layer is close to the skin and made of non-woven fabric; the middle layer is water-absorbent fluff pulp, added with polymer water-absorbing agent; the outer layer is an impermeable breathable film.