Method for making fried seaweed pieces
For stocking grass and silage, farmers usually use baler machine to make them as round bales.
There're many types bale machines, some big Bale Machine can pack big bales weight about 1ton or more, its packing and delivery all need big machines as it's difficult for human to move.
Big farms with lots of grass usually pack big bales, for small farms, farmers usually pack small bales.
Small bales usually weight 70-90kgs, diemeter about 1m, wrapped with Silage Film 250mm width.
For small farms, small bales are much more suitable for silage stock, and small bale machines are more popular.
Bale Machine Bale Machine,Silage Bale Machine,Baler For Round Silage Roll,Small Bale Machine For Farm Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com
1. The fresh seaweed is cut into small pieces and put into water to be in a dissolved state. After the paper making process, it is formed into a sheet shape required by the product, or forms the shape of a laver of a normal size. Then, a certain shape of seaweed is dehydrated, forced drying is performed by a drying process, and at the same time, water is sprayed onto the dried laver to bind a plurality of sheets of laver together to a certain thickness.
2. Place dried laver in the wire directly into the wire basket. If it is a normal size dried seaweed, it should be cut and placed in a wire basket.
3. Pre-heat frying oil or salad oil to 150°C or more.
4. Place the wire baskets containing dried nori sheets in the hot oil, and quickly remove the baskets from the oil after about 5 seconds.
5. Move the laver slices in the basket into a centrifuge to separate the surface oil.
6. Place the seaweed slices from which the grease has been removed into other containers and season them with seasonings such as salt.
7, after the seasoning, bagging seal as soon as possible.
Since dry seaweed is fried in a frying oil having an oil temperature of 150° C. or more, the product is crispy and has a good color. Before the oil is sprayed into the oil, the laver is glued together and the thickness of the laver is adjusted.
