Installation and commissioning of the sandwich pot

You introduce the installation and commissioning of the sandwich pot:

1. When unpacking, check whether the products and accessories of the sandwich pot are consistent with the packing list. If the products and parts are damaged during transportation, if there is any loss or damage, please solve the problem with the company in time.

2. The performance of the sandwich pot product has been tested before leaving the factory. The relative positions of all components have been installed and adjusted. The user generally only checks and does not disassemble it at will, so as to avoid improper installation and adjustment, which affects the product performance.

3, the sandwich pot does not need to be fixed, as long as it is placed on a flat concrete floor.

4. After the sandwich pot is in place, please complete the spare parts according to the “installation diagram” and check whether the equipment is complete and flexible.

5. The power supply should meet the requirements of the agitating structure of the equipment. The equipment casing must have a good grounding to avoid accidents caused by leakage.

6. When installing the sandwich pot, care should be taken to ensure that the inlet and outlet pipes are unblocked and there is no obstruction.

7. When the water supply test of the tilting sandwich pot is carried out, please check whether the four bolts fixed by the universal joint are loose during transportation.