Experience has shown that in order to extend the service life of tractors, we must adhere to the correct methods of operation and use, and we must always do a good job in maintenance and repair. 1. After buying a new tractor, read the product instruction manual and maintenance manual carefully. In strict accordance with the requirements of the use of the wear test run, this is the key to prolong the service life of the various parts. Without grinding, full load work is not allowed. 2, the use of fuel, oil and grease must meet quality standards, according to the appropriate choice of seasons and regions. When using, always pay attention to water temperature and oil pressure, control within the specified range, should not be too high or too low, so as to avoid wear, resulting in damage to the machine. Always inspect the air filter to avoid the wear of the piston group and cylinder liner; check the oil filter and lubrication system in time and change the oil regularly. 3, try to avoid long-term overload operation of the tractor, not overloaded speed operation. The tractor load has a certain limit. If it exceeds the range, the parts of the machine will be subjected to excessive force and the lubrication conditions will deteriorate. This will accelerate the wear of the parts and shorten the service life of the tractor. 4. It is necessary to carry out the technical maintenance of the tractor in a timely and accurate manner, so that the tractor is in a good technical condition and the fault is immediately eliminated. 5, regular maintenance of locomotives, if you need to replace parts, use qualified spare parts. After inspection and maintenance, it should be tested and run-in, test the power consumption, reach the standard and put it into use. 6, correctly master the driving skills, to overcome the starting, parking, will be a variety of bad habits. 7. Take care of the tractor properly. After the operation, perform a complete overhaul and then park the car in the garage or cover it with rain-proof equipment. Do not store it in the open air to avoid wind, sun and rain. Remove paint, rust, damage.
We are specialized manufacturers from China, Dermal Filler , Ha Dermal Filler Injectable suppliers/factory, wholesale high-quality products of Face Fillers R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Hyaluronic Acid Fillers can easily remove your facial wrinkles, such as wrinkles between the eyebrows, annoying nasolabial folds.
In general, Ha Dermal Filler the main functions are removing forehead lines, eyebrow lines, crow's feet, neck lines, and other facial fine lines.
Besides, nasojugal fold, nasolabial fold, etc can also be filled by best deep Wrinkle Filler, to restore the smooth and young in the past.
Natural, Beautiful, You---Auro SecretDermal Filler
Dermal Filler,Face Fillers,Ha Dermal Filler,Ha Dermal Filler Injectable
Auro Technology Limited , http://www.aurocn.com