Prevention and Cure of Shaft Rejection of the Clutch Shaft

A common malfunction of many walking tractors is that the clutch shaft throws oil outward. Some drivers have to install a metal block near the clutch to block the oil, and some hang a bottle under the clutch to contain the leaking gear oil. These are all negative measures and do not prevent the gear oil from throwing out. These gear oils are carried by the transmission chain. Leakage between the clutch shaft and the claw bearing cover and the separation claw seat. First, the main reason for clutch shaft oil rejection The design is flawed. Many of the tractors currently produced still use the old design of the early years. No oil seals are provided on the claw bearing caps, and there are no screw return grooves in the inner holes of some separation claw seats, or the spiral return grooves are opened. Wrong, plus a large clearance between the separation claw seat and the claw bearing cover and the clutch shaft, so the oil is inevitable. 2. The use of the environment is too harsh Because the walking tractor does not have a cab, clutches and other components are often eroded by rain; muddy water splashes around when the paddy field is rotating, and dust is soaked during sowing and harvesting operations. , Separation claws and clutch shafts and other parts. Due to the harsh environment of use, parts wear is accelerated, and the clearance between parts is too large, resulting in easy throw-out of gear oil. 3. As the clutch at both ends of the bearing wear, or the transmission belt tension is too large and the clutch shaft is bent, causing the clutch shaft to tilt, the shaft and the separation claw seat bite, so the clutch shaft to drive the separation claw seat together to rotate, eventually leading to oil. Second, clutch oil rejection measures 1. Improved product design The manufacturer should change the old design, install an oil seal at the claw bearing cap or use a better structure. 2. The spiral groove of the car makes a spiral groove of sufficient depth in the inner hole of the separating claw seat so as to guide the pumped gear oil back to the gear box. 3. Filling Grease Before installing the rolling bearing, fill the claw bearing bowl with grease and apply grease to the inner wall of the separation claw holder. After a certain period of use, the clutch assembly and the separation claws can be removed, and the release grease can be added to the separation claw seat until the grease is pushed out to the separation claw seat.

Name: Fungus King seasoning
Spec.: 500 g
Shelf life: 12 months

Ingredients: Vegetable oil, bovine liver bacteria, mushrooms, chili peppers, bean paste, garlic, onions, Chicken Seasoning, ginger, chili, liquor, white sugar, edible flavor spices and so on. 

Storage method: Normal temperature, avoid light storage, open the bag after refrigeration.

Hot Pot Dipping Sauce

Hot Pot Dipping Sauce,Hot Pot Sauce,Hot Pot Soup Base,Hot Pot Soup

ChongQing Baifu Foods Co., Ltd. , http://www.baifufood.com