Use of YZZX Series Vibration Carrier Swirl Dryer
Mct Powder is microencapsulated medium chain triglyceride oil, could be absorbed easily by human body than lipid. it has all functions of mct oil, and much more benefit because of health additives. you can add this material to various food as supplements. currently we can produce 50% -70% oil load powder. hong song bao brand oil powder under international manufacturing standard and strict quality management system, also best service. manufacturing base near changbai moutain, every batch of our products shows you a friendly and forest feeling. Mct Powder Mct Powder,Nutrition Mct Oil Powder,Mct Oil Powder Jilin Painuo Biological Technology Co.,Ltd , http://www.painuo-biotech.com
1. Function This machine is suitable for the drying of emulsion, paste and high water content fine powder materials.
2.Characteristics (1) Evaporation, filtration, crushing, and drying can be performed in one machine to simplify the process, save investment, operate conveniently, and have few maintenance points.
(2) Large drying strength, small size, light weight, and low cost.
(3) Small installed capacity, high thermal efficiency, and energy saving.
(4) Negative pressure works continuously and the working environment is good.
Second, the dryer structure, principle Dryer from the exhaust outlet, feed inlet, secondary air inlet, inert carrier, orifice, primary air inlet, baffle spring, vibration motor and rack.
The two vibrating motors cross each other on both sides of the motor base plate. When the power is turned on, they are synchronously reversely rotated. Under the action of the excitation force, the main body supported by the spring generates lead vertical line vibration and the rotation around the vertical axis, so that The inert carrier located on the orifice plate moves continuously along the annular orifice plate. The hot air enters the plenum under the orifice from an air inlet and is then preheated by the inert carrier through the orifices. Wet material enters the dryer through the inlet and lands on the vibration carrier, forming a material mold on the carrier surface, and the carrier conducts the material thereon. Heat exchange, hot air convection heat transfer, so that the moisture of the wet material quickly evaporates, forming a dry material mold on the surface of the carrier, due to collision and friction of the carrier, the material mold quickly detaches from the carrier, crushed, and suspended in the annular space. The rotating hot air blown from the secondary air inlet blows the primary dry material in the upper part of the dryer and exchanges heat with the hot air to reach the required dry material. The air is discharged from the air outlet and is recovered by a two-stage trap. .
