Yu Sheng talks about the maintenance of paste filling machine

Yu Sheng talks about the maintenance of paste filling machine     

Author: filling machine | liquid filling machine | filling Henan Sheng Machinery Co., Ltd.

     The paste filling machine is mainly used for quantitative filling of liquids, pastes, sauces, granules and the like. How to carry out maintenance in daily work? Yusheng, as a professional manufacturer of filling machines, today revealed a little common knowledge about the maintenance of paste filling machines.

It is very important to master the temperature during the operation of the paste filling machine . When the material is heated, there will be a rebound. When the temperature reaches a certain heat, the requested temperature will appear. The heating installation part should be adjusted to delay the heat supply, but Care should be taken to avoid a sudden drop in material temperature. When the temperature is lowered to the appropriate filling bottle, the temperature controller and the electronic flow meter in the filling bottle can withstand a temperature of about 100 degrees Celsius. If the material is close to this temperature, These devices are damaged by too high a temperature, and if the temperature is lowered too fast, it will affect the correctness of the device.

The working environment has a great impact on the operation of the equipment. If the working environment is generally hot and the ventilation conditions are not very good, it will also affect the running speed of the paste filling machine. Especially obvious in winter, the surrounding humidity is large, the electrical components installed under the equipment task table will be greatly threatened, and the hot air emitted by the exhaust fan is more likely to cause short circuit of these electrical components. The most effective means is to improve the working environment. Another method is to move the main components to the ventilated and dry place or add a conduit at the hot air outlet of the fan to pass the hot air to the outside, increasing the emission of hot gas around the paste filling machine, reducing The ambient temperature, the best temperature in the workshop is around thirty degrees Celsius.

When the equipment is stopped, it should be simply maintained, especially the gears, springs, bearings, etc., so that it will not affect the use of the next work, the paste filling machine will be used after a period of use It is cleaned to ensure the quality of the newly filled material. Sometimes the size of the filling bottles will affect the filling quality. For example, some manufacturers put the unsuitable bottles on the production line for cost saving, if the bottles are large to the paste filling. When the machine enters and exits the bottle dial, it will be stuck, which will affect the filling efficiency. If the bottle mouth is small, the valve needle of the filling valve will easily touch the bottle edge, which will cause debris to enter the bottle and affect the filling quality.