Salt spray corrosion test chamber
Structure and features: Royal Jelly is also called Bee Milk. The fresh royal jelly is slightly ropy milk paste substance; it is the excretive mixture of nutrition gland and maxilla gland of the head of little worker bee. The worker bees use this to feed the 1-3 days` worker bee larva and drone larva, 1-5.5 days` queen bee larva and queen bee in the oviposition period. The royal jelly is the biologic product containing very complicated active elements which contains almost all the nutrition elements required by the growth of the human body. Royal Jelly Royal Jelly,Natural Royal Jelly,Healthy Royal Jelly,Organic Fresh Royal Jelly Easy Food (Jiaxing) Co., Ltd. , https://www.jxeasyfood.com
The company introduced a new generation of PVC board structure and tower spray YW/R series salt spray corrosion test chamber, which replaced the salt spray corrosion test box made by the whole glass fiber reinforced plastic. A new generation of PVC board structure, tower spray salt spray corrosion test chamber, more rigorously designed the test "studio". Due to the scientific use of the PVC transparent cover, it is reasonable to place the visual sample in the test, which makes up for the lack of sample displacement in the previous closed test. At the same time, the tower spray method not only sprays evenly, but also simplifies the adjustment of salt spray settlement (easy adjustment), and reasonably increases the capacity of the studio. In the working room, the water heating method is adopted to increase the humidity during the salt spray corrosion test in the working room, and gradually integrate with the world's advanced wet heat salt spray test standard. The scientific and technological content of the salt spray corrosion test has been greatly improved. The method of water heating has high reliability and convenient maintenance, which completely improves the unsafeness of the jacket heating of the former FRP shell and improves the uniformity precision of the room temperature. The design of the new generation of PVC tower spray control part allows users to see the parameters of various high-precision instruments at a glance, and quickly understand the working conditions of the “saturation†and spray “pressure†of the studio saturator in the test.
In addition to the advantages of the above categories, more important is the PVC plate tower spray, which is not only scientific and reasonable in design, but also exquisite in production process, and the appearance is generous and beautiful, especially the quality and technology content of the “Salt Fog Test Chamber†is pushed to one. Outstanding high-end. In the entire market, it is a generation of boutique.
Daily maintenance and repair tips
1. If the user supplies air with the "air compressor", the lubricating oil should be regularly added to the fixed gas compressor.
2. At the end of each test, the oil-water separator switch should be turned on to drain the oil and wipe it clean.
3. If the test is not carried out for a long time, the water in the saturator should be drained. When it is used normally, the water in the saturator should be replaced regularly.
4. When it is not used for a long time, if it is re-tested, it should be checked systematically for all electrical appliances and water supply and gas supply systems. In case of a line failure after booting.
5. The electrical components on the control system panel need to be replaced in time if there is a fault. If you need to replace it, please do not fold it. You should consult the “Technical Department†of the company in time, and then disassemble it after consultation to ensure the service life of the test box.
6. It is found that the nozzle dirt is clogged, the nozzle is folded down in time, and it is cleaned with alcohol, xylene or 1:1 hydrochloric acid or carefully cut with ultra-fine steel wire, and the nozzle wall should not be damaged, so as not to affect the spray quality.