鹌鹑 hatching hall
The hatchery is a place where young chicks are born. The proper temperature, good ventilation, cleanliness and asepsis are important conditions for ensuring a high hatching rate and the health of young chicks. The hatchery consists of the disinfection room, toilet, egg storage and egg-sterilization cabinet (room), egg-laying room, hatching room, hatching room, diner room and grading room, hatchery room, power distribution room, warehouse at the entrance of the hatchery. And incubator cleaning and disinfection room components. The entry of personnel into the hatchery and the hatching of hatching eggs into the hatchery must be a one-way process. The most important structural requirement of the hatchery is good insulation. Incubator room temperature should be maintained at 25 °C. The wall and floor of the hatchery are required to be smooth, and the volume is moderate. The drainage channels provided in the room should be unobstructed. It is convenient for cleaning, cleaning, fumigation and disinfection. The windows should not be too large. The windows should be used for living, which is convenient for ventilation and conducive to shading. Insulation. Another building requirement of the hatchery is fire prevention. The hatchery uses a lot of electricity, and the circuit layout and specifications must be reasonable to prevent fire caused by a short circuit. Emergency exits and main switches should be set up. In the event of an accident, the power supply can be cut off in the shortest possible time. The egg bank set up in the hatchery should be convenient for fumigation and disinfection, insulation and insulation (position for installing air conditioners), good ventilation, and prevention of rat damage, so as to ensure proper preservation conditions of the eggs and good hatching results. The hatchery is best separated from the hatchery. When fledgling out of the hatchery, fluff flies and affects the air environment and hygiene of the hatchery. The last important part is the protozoal classification room and the vaccination room. The Department requires thermal insulation and is easy to sterilize and can maintain room temperature at 25 to 30 °C. Plastic Hinges,Plastic Door Hinges,Small Cabinet Hinges,Plastic Cabinet Hinges Ningbo Hengchieh Locking Technology Co., Ltd. , https://www.hengchieh.com