Safety application transplanter - keep an eye on matters

(1) The operator and handle of the transplanter must undergo comprehensive technical training before the arrival of the transplanting period, fully understand the structure, performance and working principle of the rice transplanter, and skillfully grasp the essentials and care.

(2) When starting the engine, the main clutch handle and the planting clutch handle should be placed in separate positions; when the starting handle is shaken, it should be pushed inward to prevent bumps.

(3) It is necessary to stop the flameout when adjusting the amount of sputum, and the main clutch must be cut off when making other adjustments, clearing the door or separately.

(4) During the transplanting operation, the ship's board should be kept clean to prevent the disc or other debris from being wrapped around the drive shaft or the universal joint; the operator must not use the foot to clear the weeds and soil between the walking wheel and the walking gear box.

(5) Always check and tighten the bolts on the back of the box to prevent the upper slide from being damaged due to the nut falling off.

(6) When the transplanter is changed, the clutch should be planted in time to prevent damage to the transmission universal joint parts.

(7) When holding or picking up the seedlings, keep your hands wide open to prevent the needles from being stabbed.

(8) When you pass the field, you should pay attention to the door and not be hit. When crossing the channel, you should take the board and pass slowly.

(9) When generating a trap in the transplanting operation, do not lift the transmission assembly and other transmission parts such as the elbow and the sprocket box. Lift the ship plate or add a wooden bar between the walking wheel blades to make the rice transplanter Climb out on your own. (Book Wave)