Maintenance points of small Chinese medicine grinder

The small Chinese medicine pulverizer is equipped with ultra-high-speed fine motor and high-grade bearing, which can quickly crush all kinds of soft and hard medicines, such as: Ganoderma lucidum, Sanqi, American ginseng, etc.; suitable for various Chinese pharmacies, pharmacies, Chinese medicine processing plants, etc. The machine has the characteristics of small volume, high efficiency, simple operation, exquisite appearance, power saving, safety, etc. It is the most ideal pulverizing equipment for making capsule pills. It adopts high-speed single-phase motor, which has the advantages of precise structure, small size, light weight, high efficiency, no dust, clean and hygienic, simple operation, beautiful appearance, energy saving and safety, etc., which makes the production of medicine, food and chemical more in line with national standards. , to meet the requirements of GMP.

How to maintain Chinese medicine crusher:

1. The newly installed tires are prone to loosening and must be inspected frequently.

2. Pay attention to the degree of wear of the wear parts and pay attention to replace the worn parts.

3. Pay attention to whether the work of all parts of the machine is normal.

4. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good.

5. After installation, check if the bolts in all parts are loose and the main door is tight. If necessary, tighten them.

6. After the inspection is completed, work can be done normally. This unit cannot be used continuously for a long time, and the time for each boot should not exceed 5 minutes. If the number of processing is large, it should be used at intervals to prevent the bearing from overheating and damage the motor.