Vacuum packaging machine treatment method with poor pumping effect

When using a vacuum packaging machine for vacuuming, it is often found that some products after vacuuming are not completely vacuumed, and the vacuum effect is not good. In fact, if you encounter these problems, it is easy to solve a little knowledge about this.

The following is a brief introduction to everyone about how to solve the vacuum pumping machine is not good:

1. First of all, the machine itself should be considered to see if the machine itself has an error. If the machine itself has an error, we must repair the machine.

2. Secondly, it is necessary to pay attention to whether the air pipe leaks, whether the solenoid valve leaks, whether the vacuum pump is damaged or lack of maintenance.

3. When the vacuum machine is running normally, the vacuum gauge and the computer board are adjusted normally, but after vacuuming, the air in the vacuum bag is not removed. What is going on? After inspection by the staff, it was found that when the product was placed, the length of the vacuum bag mouth was too long, and the vacuum cover was pressed down, and the sealing strip was pressed against the mouth of the bag, so that the vacuum was not cleaned at all. .

The above is an introduction to how the vacuum packaging machine is not good at pumping, and I hope to help everyone. Vacuum packaging machine is our commonly used packaging equipment, mainly used for the packaging of various items. Our commonly used vacuum packaging machine has single chamber vacuum packaging machine, double chamber vacuum packaging machine and so on.