Eggplant Seedling Management Points

After 70% of the seed in the seedbed emerged, the plastic film covering the bed soil was removed. Always spray water to keep the soil moist. During this period, we must pay attention to the prevention and control of underground pests, the method is to use 80% dichlorvos EC, plus 1200 to 1500 times diluted in water and then poured on the seedbed. When there are two true leaves in the seedlings, separate seedlings are to be prepared, and the seedlings for the seedlings shall be prepared, and the seedlings shall be transplanted at a spacing of 8 cm and 8 cm. After the relocation, it should be irrigated, and keep the high temperature to promote the slow seedlings. Daytime 28°C~30°C, about 20°C at night, 2~3 days to slow seedlings. When the seedlings grow to 9 to 10 true leaves, 7 to 10 days before planting, cutting and drying are started.

The seedlings are cultivated at low temperature by irrigating the seedbeds and then cutting the seedbed soil into pods to gradually increase the amount of air release. Remove grasshoppers at night and properly control temperature and moisture before planting. The standard of eggplant seedlings is: 50 to 60 days of seedling age, plant dwarfing, upright and straight, door buds budding, dark green leaves, and complete root system. Before the colonization, pest control was carried out again, spraying 40% dimethoate 1200-1500 times or deltamethrin 5000 times.

Rim Cylinder

Each Rim Cylinder is machined from solid brass bar stock and is furnished with lost motion tailpiece, trim ring, mounting plate, and break-off screws. The standard rim cylinder can be easily converted to a Mortise Cylinder by simply replacing the rim tailpiece assembly with the appropriate cam.

rim cylinder

Exact pinning specifications as original systems

Solid brass construction
22 keyways
Tailpiece converts between horizontal & vertical positions

Screw-on retaining cap design

Collar for Rim Cylinder

Attractive collar finishes off any application.

Comes in polished brass (3), satin chrome (26D) and oil rubbed bronze (10B) finishes

Rim Dummy Cylinders
Non-hollow solid brass housing
Furnished with collar, mounting plate & screws




Rim Door Cylinder Lock,Brass Rim Cylinder,Door Lock Cylinder Security,Rim Lock Brass Cylinder

ANDJA TRADING PET. LTD. , https://www.lock-cylinder.com