How to handle the meat grinder

The meat grinder is a granular meat filling in which the meat processing enterprises process the raw meat according to different processing requirements in the production process. It is widely used in various sausages, ham sausages, lunch meat, meatballs, salty flavors, pet foods. And other meat products and other industries. Made of high quality (cast iron) or stainless steel, it is non-polluting to processed materials and meets food hygiene standards. The tool is specially heat treated, with excellent wear resistance and long service life.

The meat grinder is easy to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. After processing the material, it can maintain its original nutrients well and has a good preservation effect. The tool can be adjusted or replaced at will according to the actual use requirements. After assembling or changing the reamer, the tightening nut must be tightened to ensure that the grid does not move. Otherwise, due to the relative movement between the grid movement and the rotation of the reamer, it will also cause the effect of material refining. The reamer must be closely attached to the grid, otherwise it will affect the cutting efficiency. The screw feeder rotates in the machine wall to prevent the spiral surface from colliding with the machine wall. If it touches slightly, it will damage the machine immediately. However, their clearance can not be too large, too much influence the feeding efficiency and extrusion force, and even make the material flow back from the gap, so the processing and installation requirements of this part are higher.

Everyone knows that meat grinders are convenient and quick, but if the meat grinder is found to be rusty, the ground meat is undoubtedly a waste of good materials, so how can we solve the problem of rusting of the meat grinder?

Generally, metal iron products are rusted, and the rust can be removed by physical means. However, if the surface of the iron product is not flat, it is more difficult to use physical methods. For the inside of the meat grinder is a spiral, we can not use a simple method to remove the rust. Here are a few easy ways to refer to: 1. Mix well with fine sand and yellow mud, put them into the meat grinder for mixing, and let the fine sand and yellow mud remove the rust from the meat grinder. But be sure to pay attention not to install the blade, otherwise the blade will be broken.

2, you can go to the store to buy some rust spray, spray a spray to remove the rust. However, this method does not know whether the rust removal is toxic or not.

3, you can have rice water soaked meat grinder. It takes a few days to use a very thick rice blister.