Forced mixer daily maintenance
Interventional Surgical Pack,Procedure Packs Kits For Clinic,Procedure Packs Kits For Surgical,Sterilized Surgical Angiography Kit Suzhou JaneE Medical Technology Co., Ltd. , https://www.janeemedical.com
Before each shift, at work and after work.
1. Maintain the cleaning of the concrete mixer body and remove dirt and obstacles from the body.
2. Check the oil and circuit and control equipment of each lubrication place, and fill the oil as required.
3. The mixer should be equipped with secondary leakage protection. After the power is turned on before going to work, it must be carefully inspected. It can only be used after passing the empty car test.
4. Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, the surrounding is unobstructed and the lubrication of each part.
5. Before each shift, add water to the mixing drum for 1 to 2 minutes, and check the reliability of the clutch and brake device.
6. During the operation of the concrete mixer, the noise of the motor, reducer and transmission gear should be checked at any time, and the temperature rise is too high.
7. After starting the machine, always pay attention to whether the operation of the components of the mixer is normal. When shutting down, always check if the mixer blades are bent and the screws are knocked down or loose.
8. After the end of each shift, the concrete mixer should be carefully cleaned.
The forced mixer is rapidly popularized due to its light weight, high efficiency, good mixing quality, simple structure and convenient operation.