How to extend the life of the tablet press?
Monkfish-Sliced,Monkfish-Fillets,Monkfish Tails With Skinless,Monkfish Tails With Skin-On GOLD STAR FISHERY ZHOUSHAN CO.,LTD. , https://www.goldstar-aquatic.com
1. Review the machine parts of the press machine for 1-2 times a month. The review items are worm gears, worms, bearings, pressure rollers, crankshafts, high and low guide rails, etc. The dexterity and wear of the various parts of the motion can be timely. Repair application.
2. When the tablet press is used or resumed once, the residual powder should be taken out and the residual powder of the machine name should be brushed off. If the time is long after the stoppage, the whole die must be removed and the whole machine must be wiped clean. The glossy surface is coated with anti-rust oil and covered with a cloth.
3, the support of the die should be placed in the covered metal box, so that the whole die is immersed in the oil, and to be maintained clean, do not make rust and bruises, Zui can customize the iron box to install a box in each specification, It can prevent the formation of errors during operation and help control the damage.
4, the application of the tablet press should always be cleaned, especially for the production of medicine and edible tablets, it is more suitable to have sand and fly dust.
Accurately doing the above four points will enable the small-sized tablet press to be efficient and safe to consume. At the same time, it can also extend the "life" of the base, so that you can increase energy consumption and environmental protection while increasing the unnecessary cost.