Twelve loofah prescriptions cure cramps
Loofah contains B vitamins to prevent skin aging, brighten the skin's vitamin C and other ingredients, can protect the skin, eliminate plaque, make the skin white, delicate, is a rare beauty Jiapin, so the loofah juice has "beauty water" It is called. Loofah contains high levels of vitamin C, containing 8 milligrams per 100 grams, which can be used for anti-scurvy and prevention of various vitamin C deficiency. In addition, the following lists some of the remaining therapeutic recipes for loofah. (1) treatment of sinusitis: dry loofah with iron pot baked coke, research into what the end of fine. Each serving 6 grams, in the morning fasting boiled with warm water, and even served 8 days. (2) Treatment of pharyngitis: Wash the tender loofah with smashed juice and add appropriate amount of sugar. 1 spoon a day, 3 times a day. (3) cure cold cough: Loofah self-baking, research into fine, refining honey for the pill, 9 grams each time, 3 times a day. (4) The treatment of bacillary dysentery: Loofah roots, stems, leaves can be washed after smashing juice squeeze 2 spoons each time, 3 times a day. (5) Insufficient milk treatment: Method 1: 60 grams of loofah, 1 trotter, cooked when the dish is cooked. Method 2: One old loofah, dried in the shade, burned, researched, and brewed in rice wine, 9 grams per serving. (6) Treatment of allergic asthma: Method 1: Wash the loofah vines and smash the juice, each serving 1 spoon, 3 times a day. Method 2: 2 small loofahs, cut off, put in the casserole boil, take juice 150 ml service, 3 times a day. (7) cure acne caused by bloody stool: Method 1: Loofah flower 30 grams, 15 grams of flowers, decoction, 1 time a day. Method 2: 250 grams of fresh loofah cut, 200 grams of pork lean slices, add water, a total amount of soup, boiled salt seasoning meal. (8) treatment of neuralgia: the loofah juice drink after warming, the dose may be based on the symptoms, about 100 ml per day, or with loofah leaf smashed juice squeezed the affected area, but also has a curative effect. (9) cure skin bloated: fresh loofah 1, after smashed deposited in the affected area, and then wrapped with gauze, dressing 1 times a day. (10) treatment of urticaria: fresh loofah leaves, smashed squeezed juice, add a little borneol, smear the affected area. (11) cure alopecia areata: old loofah slices, hard to wipe the site of no hair until the local fever, 2-3 times a day. (12) Treat excessive sweating: Burn the old loofah into charcoal, research into fine, sprinkle in shoes, barefoot and wear half moon. Crosswalk Led pedestrian Traffic Light China Led pedestrian traffic light,Led pedestrian traffic light,Led pedestrian traffic signal light,pedestrian traffic light Shenzhen Wide Way Optoelectronics Co., Ltd. , https://www.wdmtrafficlight.com
A set of Led pedestrian traffic light composed of a red pedestrian standing pattern and a green pedestrian walking pattern inside to guide pedestrians to pass.
When the green light is on, pedestrians are allowed to cross the crosswalk.
When the red light is on, pedestrians are prohibited from entering the crosswalk, but those who have already entered the crosswalk can continue to pass or stay at the center line of the road to wait.
The LED pedestrian crossing light is a new concept traffic signal light developed by our company using the most advanced LED light-emitting devices abroad. Its wick has good viewing angle, uniform brightness, chromatographic standard, low power consumption, long life, reduced degradation, high reliability and strong stability. , Good temperature resistance, wide voltage operation range. The lamp body is made of aluminum die-casting one-time die-casting, which is specially designed for LED lamps. The lamp cover is opened in V-shaped design, and it can be screwed by hand without any tools. Double sealing, ultra-thin design and light weight. It is a trendy product of today's traffic pedestrian lights, and all indicators meet or exceed the GB14887-2003 standard.
2. Appearance and structure
LED pedestrian crossing lights are composed of two parts, red people forbidden images and green people allowed to communicate. The shell adopts the lamp housing independently developed and produced by our company. The lamp housing has the following characteristics:
1. Using special pc shell, light weight, high strength, small deformation under high and low temperature conditions, and strong corrosion resistance.
2. The lamp housing is specially designed for pedestrian crossing lamps. It is small in size and beautiful in appearance. During the production process, it has undergone multiple processes such as die-casting, screening, trimming, shaping, and spraying. The surface of the finished product is smooth and clean, free of cracks, burrs, and silver wires. And other defects.
3. The color of the lamp shell is black, which is bright in color and will not fade after long-term use.
4. Appearance shape, using square shell, square shade lampshade, glass fiber reinforced plastic translucent color film with uniform brightness, wide vision and strong light transmission.
5. Airtightness. In order to maximize the dustproof and waterproof performance of the lamp housing, double sealing technology is adopted. First, a waterproof sealing ring is specially designed at the joint between the lamp cover and the lamp housing, and a special seal is used inside the signal lamp. The tray seals the LED luminous lamp sheet and the power supply with the transparent cover and the tray to maximize the sealing effect under various outdoor weather conditions. Through the above measures, the protection level of the signal lights produced by our company can reach the IP53 standard.
6. Installation, the signal lamp housing is designed with full consideration of various installation forms, and is equipped with a variety of mounting brackets, and a universal chainring is designed at both ends of the signal lamp to facilitate adjustment of the installation angle; the lamp cover adopts an open form, and Specially equipped with hand-tightening fixing screws, the lamp cover can be opened without any tools during installation and maintenance.
7. The signal lamp needs to be used outdoors for a long time. In addition to ensuring the durability of the main body of the lamp housing, our company uses stainless steel screws to fix each signal lamp assembly.
3. Lamp housing material
1. The signal lamp shell is made of aluminum die-casting, which is light in weight and good in strength. It is not easy to be deformed and aging when used outdoors for a long time.
2. The sunshade and decorative strip of the signal light are made of ultra-thin metal, which has high strength and good flexibility.
3. The color film adopts toughened glass, which has good light transmission, is not easy to get dust, and it is broken and harmless to people.